Saturday, June 8, 2019
Writing Conclusion and summary for the Report Essay
Writing Conclusion and summary for the Report - Essay ExampleThe importance of constructing sassy storage ponds has increased in importance due to heightened concerns regarding droughts. The District has Conditional Rights to build these four ponds, which together could have water rights to hold up to 13 acre feet.The purpose of our involvement was to perform a technical analysis, water capacity estimate, feasibility study, design, cost estimate, and draft application for building up to four superfluous water augmentation ponds within the Districts territory. The following deliverables were requested4. Design for each of the four detention ponds including the proposed construction sequence, pond liners, water input sources, pond water capacity, issue works including water flow back into the watershed, flood protection, erosion control, landscaping, and costs.As part of our investigation, we performed a site visit on January 29 and also met with Mr. Laves to get under ones skin th e background on the FHMD storage ponds. We also MoreInformationHere. This report contains our findings, conclusions, and recommendations. pond areas lacking sufficient amount of clay are highly susceptible to excessive seepage. Pond areas can be sealed by clay blankets to prevent seepage. The clay blankets are placed on pond areas where Water is to be impounded as healthy as the upstream slope of the embankment. (USDA Ponds 63) Minimum clay blanket requires 20 percent clay and to reduce cost, clay can be obtained from borrow areas coating to the ponds. The minimum compacted thickness is 12 inches for all depths of water under 10 feet. Increase this thickness by 2 inches for each foot of water oer 10 feet and above. (USDA Ponds 63) Clay blankets are constructed similar to earth embankments and are spread uniformly over pond areas in moulds of 6 to 8 inches and each layer should be compacted completely, under optimum moisture conditions. The clay blankets
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.